Table of Contents
Advertisement
CHAPTER 4: How to Use the Genie Monaural Headset
2. Put on the headset so that the headband rests
lightly on your head. You can then easily adjust the
headband for proper fit.
3. Adjust the flexible microphone boom so that the
noise canceling microphone is positioned
(approximately the width of your finger) below
and away from your lower lip.
4. Adjust the position of the clothing clip and affix it
to your clothing for comfortable, neat wearing.
5. Plug the Quick Disconnect* into the Quick
Disconnect on the amplifier that plugs into your
phone. Place and receive calls according to the
amplifier or telephone instructions.
* The connector at the end of the headset cord. It
lets you quickly disconnect the headset from the
amplifier.
The Genie Monaural Headset comes with foam covers over
the receiver and microphone which can be replaced if they
become soiled. The replacement products are:
Foam receiver cover for Genie Headsets
Foam microphone windscreen for Genie Headsets
Contact Black Box Technical Support at 724-746-5500
for details.
NOTE
1
⁄
"
2
17
Advertisement
Table of Contents
