Advertisement
1
Maxa Technologies Ltd
MT-200E Wireless Communication Settings
Manual
Ver 1.1
18/06/2013
This Instructions manual is step by step configuration for
Wireless printer MT-200E only, starting from configuring printer
'out from the box' to successfully communicate in Infrastructure
mode.
Maxa Technologies Ltd
MT-200E WIFI manual
Ver1.1
Advertisement
Table of Contents
Summary of Contents for MAXA MT-200E
- Page 1 MT-200E Wireless Communication Settings Manual Ver 1.1 18/06/2013 This Instructions manual is step by step configuration for Wireless printer MT-200E only, starting from configuring printer ‘out from the box’ to successfully communicate in Infrastructure mode. Maxa Technologies Ltd MT-200E WIFI manual...
- Page 2 If you have problem to find the printer – turn off firewall also it is worth to set static Ip address of your PC wireless card to be in the same subnet (default IP printer is 192.168.0.254 when reset button is pressed on printer wireless card) like 192.168.0.10 Maxa Technologies Ltd MT-200E WIFI manual Ver1.1...
- Page 3 Set printer to Infrastructure mode which wireless settings that will match your router configuration. In my case is MaxaGuest and WPA2-PSK key, Chanel 6 Maxa Technologies Ltd MT-200E WIFI manual Ver1.1...
- Page 4 1. When driver is installed – it needs to be installed in the same network, in our case infrastructure network. During installation you will be asked to enter printer IP address: IP address can be changed anytime in Printer Properties under Ports tab/Configure port Maxa Technologies Ltd MT-200E WIFI manual Ver1.1...
- Page 5 There is no driver available for other systems, please use manufacturer’s SDK: Android SDK 1.060C iOS SDK 1.48 Maxa Technologies Ltd MT-200E WIFI manual Ver1.1...
Need help?
Do you have a question about the MT-200E and is the answer not in the manual?
Questions and answers