D-Link DWL-2700AP User Manual page 68

2. The wireless client cannot access the Internet in the Infrastructure mode.
Make sure the wireless client is associated and joined with the correct access point. To check this connection: Right-
click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to
Wireless Network screen will appear. Please make sure you have selected the correct available network, as shown
in the illustrations below.
 Check that the IP address assigned to the wireless adapter is within the same IP address range as the access
point and gateway. Since the DWL-2700AP has an IP address of 192.168.0.50, wireless adapters
must have an IP address in the same range, e.g., 192.168.0.x. Each device must have a unique IP
address; no two devices may have the same IP address. The subnet mask must be the same for all
the computers on the network.) To check the IP address assigned to the wireless adapter, double-click on the
Local Area Connection icon in the taskbar > select the Support tab and the IP address will be displayed. Please
refer to Checking the IP Address in the Networking Basics section of this manual.)
 If it is necessary to assign a Static IP Address to the wireless adapter, please refer to the appropriate section in
Networking Basics. If you are entering a DNS Server address you must also enter the Default Gateway Address.
(Remember that if you have a DHCP capable router, you will not need to assign a static IP address.
See Networking Basics: Assigning a Static IP Address.)
D-Link DWL-2700AP User Manual 68