Compressor Protection - Honeywell RTH2510 series Operating Instructions Manual

Built-in compressor protection About your new thermostat
6 : 30
am
We
Wake
Message flashes until safe restart
time has elapsed.
75
Cool
On
M32711
This feature helps prevent damage to the
compressor in your air conditioning or heat
pump system.
Damage can occur if the compressor is
restarted too soon after shutdown. This fea-
ture forces the compressor to wait 5 minutes
before restarting.
During the wait time, the display will flash
the message Cool On (or Heat On if you have
a heat pump). When the safe wait time has
elapsed, the message stops flashing and the
compressor turns on.
15
RTH2510/RTH2410
69-2601ES—01