Specifications Unit Size: mm (Inch) 587.5 TECHNICAL SPECIFICATIONS ITEM CATEGORY PERFORMANCE DATA Operating Voltage 220-240Vac, 50/60 Hz, 4.6-5A, 1.0-1.2 kW...
Recommended Mounting Heights DIM’S From Bottom of Dryer From Top of Hand From Datum Point Drying Chamber 1150 Women 1080 Children 4-7 years Children 8-10 years Children 11-13 years 1080 Children 14-16 years Handicaped ...
General Safety Information Disconnect power at the This product is intended service breaker before installing or servicing. for installation by a qualified service person. not for household use - may case burns. Use AWG NO.16 solid conductor for wiring. (1.2mm²...
Cleaning and Maintenance Periodic cleaning of the unit is recommended to ensure optimum performance. Wipe the cover with a damp cloth and mild cleaning solution. Do not Soak, Do not hose down. Never use abrasives to clean the cover. Caustic chemicals may damage unit finish. No internal parts need any regular cleaning.
Page 6
Air Speed Adjustment The dryer air speed can be adjusted. However, when lowering the motor speed, the drying time will increase also. The ability of this function will be dependent on the needs of the owner. The factory setting for dryer’s motor speed is set at its highest speed. See below for how to adjust the dryer speed: ...
How to Change the Filter Use key (supplied) to unlock and withdraw the tray.(fig. 1). 2. Change the filter (fig. 2). Insert the tray back and lock the security screw. Filter ...
Page 8
Instructions for use, maintenance and changing the absorbent ceramic The absorbent ceramic can absorb 70g of water, and has the capacity to take a full load approximately 280 times per day. The ceramic also can evaporate water. During normal use, water will be evaporated continuously and maintain the function of absorbing.
Page 9
For replacement filters and spares please contact your supplier for details This product should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority for recycling advice. 403371A Supplied by APL 1012 ...