Altronics S9921A Instruction Manual

Table of Contents

Quick Links

Download this manual

Contents

Note ............................................................................................................................. 1

Basic Operation ......................................................................................................... 3

1. Add IPCam to NVR ............................................................................................ 3

2. IPC parameters synchronization ..................................................................... 11

3. System Login ................................................................................................ 13

4. Main Menu .................................................................................................... 14

5. Preview set ................................................................................................... 15

6. Record Config .............................................................................................. 16

7. Motion Detect ............................................................................................... 17

8. Playback ........................................................................................................ 21

9. Network setup .............................................................................................. 24

10. PTZ control ................................................................................................. 25

11. Restore factory settings .............................................................................. 29

IE/CMS/Mobile Connection .................................................................................... 30

1.IE connection ................................................................................................... 30

2.CMS client connection ..................................................................................... 31

3.Mobile connection .......................................................................................... 31

S9921A - Instruction Manual

Table of Contents

Need help?

Do you have a question about the S9921A and is the answer not in the manual?

Questions and answers

Summary of Contents for Altronics S9921A

Page 1: Table Of Contents
S9921A – Instruction Manual Contents Note ..........................1 Basic Operation ......................3 1. Add IPCam to NVR .................... 3 2. IPC parameters synchronization ..............11 3. System Login ....................13 4. Main Menu ....................14 5. Preview set ....................15 6.
Page 2: Note
S9921A – Instruction Manual Note  Please read this manual carefully before installing and using the machine to ensure your interests.  Do not use the power that does not match the power adapter.  Make sure to connect the ground to avoid thunder damage to the main chip before using the product.
Page 3 S9921A – Instruction Manual II. Connection For initial use, please install the hard drive. ①Connect hard disk...
Page 4: Basic Operation
S9921A – Instruction Manual  Connect VGA Output  Connect the network cable Basic Operation 1. Add IP Cam to NVR (1)To add IP cameras to NVR, please go to "Main Menu -- Add IPC" . NVR will search the IP cameras in LAN automatically.（Click “Update IP” to sync the IP...
Page 5 S9921A – Instruction Manual the device to the channel list below. Click “OK” to Save after adding devices. You can click "Modify" to change the configuration of the IP cam. For example, when you setup an IPC with ONVIF protocol, the IP Address...
Page 6 S9921A – Instruction Manual (2)Right click on the preview interface, and click “Add IPC”. If you click “add IPC” next, NVR will show the IP cameras searched automatically in LAN. Click “Add”, the selected IPC will be added to current channel.
Page 7 S9921A – Instruction Manual If you click “Add All IPC”, please select a protocol, and then NVR will automatically search and add IP cameras supported this protocol in LAN to all channels.
Page 8 S9921A – Instruction Manual (3)Click “+” in the middle of the channel, NVR will show the IP cameras searched automatically in LAN. Click “Add”, the selected IPC will be added to current channel.
Page 9 S9921A – Instruction Manual (4) Connect NVR via IE, click “setup--Device setting--System maintenance--channel mode setup”. Select channel and device, and then click “Apply”. Fill in the IPC info on the right and click “Update”. Click “OK” to exit channel mode.
Page 10 S9921A – Instruction Manual You will see the IPC when you return to the preview interface.
Page 11 S9921A – Instruction Manual...
Page 12: Ipc Parameters Synchronization
S9921A – Instruction Manual 2. IPC parameters synchronization 1. IP sync. Please go to "Main Menu -- Add IPC" . NVR will search the IP cameras in LAN automatically. Click “Update IP” to sync the IP of IPC when NVR and IPC are in the same network segment.
Page 13 S9921A – Instruction Manual (1) Encode config sync. Go to “Main menu--Encode config”. NVR will sync the encode parameters with IPC when “Sync encode set” is enabled.
Page 14: System Login
S9921A – Instruction Manual 3. System Login When the DVR boots up, the user must login and the system provides the corresponding functions with the user purview. There is one user settings. The name is Admin and has no password. Admin is the super user purview. User Admin’s password can be revised, while their permissions can’t be revised.
Page 15: Main Menu
S9921A – Instruction Manual For your system security, please modify your password after first login. 4. Main Menu When you login, the system main menu is shown as below Main Menu 1. Switch page: 3methods to switch pages in main menu: click the color picture on the sides of the main page;...
Page 16: Preview Set
S9921A – Instruction Manual area or click to hide the items.Drag items to the main page area or click to show them. 4. Shutdown：click shutdown the main menu. 5. Preview set Right click on the preview interface to enter “Preview set”.According to the situation, you can choose the main stream or sub-stream in the preview of each IPC channel.
Page 17: Record Config
S9921A – Instruction Manual 6. Record Config Set the recording parameters in the surveillance channel. The system is set 24 hours consecutive recording in the first startup. You can enter [main menu]>[record mode] to set. Record Config 【CAM】Choose the corresponding channel number to set the channel.
Page 18: Motion Detect
S9921A – Instruction Manual 【Mode】Set video state: general，detect，alarm，event，stop. General: Perform the regular recording in the set time section. Detect: Trigger the “motion detect”, “camera mask” or “video loss” signal. When above alarm is set as opening recording, the “detection recording” state is on.
Page 19 S9921A – Instruction Manual Motion Detect 【CAM】Choose the set motion detect channel. 【Enable】 means that the motion detect function is on. 【Sensitivity】Choose in the six options according to the sensitivity. 【Region】Click setup and enter the set area. The area is divided into PAL22X18..
Page 20 S9921A – Instruction Manual Motion Detect Region 【Period】Trigger the motion detect signal in the set time section.Click the left key of mouse or drag on the time blocks to select period .Yellow means the set valid. set the time section...
Page 21 S9921A – Instruction Manual 【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on. 【Delay】Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds. 【Record channel】 Choose the recording channel (multiple option supportive).
Page 22: Playback
S9921A – Instruction Manual 【Buzzer】Device buzzers when DVR detects alarm . Other alarm setting: Reference to "Motion Detect" 8. Playback There are two methods for you to play the video files in the hard disk. 1、 In the desktop shortcut menu.
Page 23 S9921A – Instruction Manual 【Date and time】Choose the date and time. Date with white border means the system date. Red background means this day has record files. 【Record type】 Normal, motion detect, alarm or others. In the video searched, blue means normal, green means motion, red means alarm.
Page 24 S9921A – Instruction Manual 【Slice search】In playback, the recording file can be sliced equally into smaller segmentation, which can be sliced equally again until the smallest segmentation. you can playback any segmentation. it save the time to find a particular recording.Select cam channel，slice number, start time and end time, then click...
Page 25: Network Setup
S9921A – Instruction Manual in the hour： 9. Network setup Network 【Net Card】You can choose cable network card or wireless network card. 【DHCP Enable】Obtain IP address automatically(not suggested) Note：DHCP server is Pre- built 【IP address】Set the IP address. Make it in the same segment with other network devices in LAN.
Page 26: Ptz Control
S9921A – Instruction Manual network devices in LAN. 【DNS setup】Domain Name Server. It translates the domain name into IP address. The IP address is offered by network provider. Refer to the DNS setting of other network devices in LAN. 【HTTP port】Web port . Default: 80.
Page 27 S9921A – Instruction Manual PTZ control 【CAM】Choose the dome camera input channel. 【Speed】Set the PTZ rotation range. Default range: 1 ~ 8. 【Zoom】Click button to adjust the zoom multiple of the camera. 【Focus】Click / button to adjust the focus of the camera .
Page 28 S9921A – Instruction Manual Special functions： 1、Preset Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position 1）Preset option Set a location for the preset, procedure is as follows: Step 1: In PTZ control, click “preset --modify” to enter preset setting page.
Page 29 S9921A – Instruction Manual 2）Preset Point Calls In PTZ control, click “preset”, choose the preset number, PTZ turn to the corresponding preset point. Picture 3.10 PTZ Control 2、Cruise between Points Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on the line 1）Cruise Between Points Settings...
Page 30: Restore Factory Settings
S9921A – Instruction Manual to save, complete setting. Step 3: click Remove Preset：click the preset point item in the information box, then click Delete button.The preset point will be removed after that. Picture 3.11 Cruise Between Points Settings 2）The Calls of Cruise between Points Click right key in preview interface, select PTZ tour—start cruise .PTZ begins...
Page 31: Ie/Cms/Mobile Connection
S9921A – Instruction Manual IE/CMS/Mobile Connection 1.IE connection Input the NVR’s IP or domain name in the address bar of IE(if http port is not 80, you need to add http port), such as http: //192.168.0.10, http: //192.168.0.10: 81，The user name and password are the same as that you use on DVR.If can’t install the IE-plugin, please open IE--Tools--Internet...
Page 32: Cms Client Connection
S9921A – Instruction Manual 2.CMS client connection  The software will automatically search and add devices in LAN.You can also click “System Setup--Device Management” to add devices.  Use DVR version2.x.x as example  Host type: choose D/N/I 2013.If click “auto search”, client will auto search devices in LAN.
Page 33 S9921A – Instruction Manual  Address: Target’s IP address, URL or ID.Please note that if url is used, the “http: //” prefix should not be included.  Port: : Mobile port in NVR.  User/Password: the same as that on NVR.