Do you have a question about the DD-40 and is the answer not in the manual?
Questions and answers
Cecil Herbert
March 31, 2025
How do adjust the tone arm lift
1 comments:
Mr. Anderson
March 31, 2025
To adjust the tone arm lift on a Micro Seiki DD-40, you have three options:
1. Adjust the screw on the wand that contacts the crescent-shaped tonearm lift paddle. This screw may be covered in rubber (which can degrade over time), and changing its position affects the lift height.
2. Adjust the horizontally oriented screw near the tonearm lift mechanism. This screw lets you move the tonearm lifter rod slightly up or down.
3. Use the Allen wrench port near the base of the tonearm assembly to adjust the overall tonearm height.
These adjustments control how high or low the tonearm lifts and can be used to fine-tune its operation.
Need help?
Do you have a question about the DD-40 and is the answer not in the manual?
Questions and answers
How do adjust the tone arm lift
To adjust the tone arm lift on a Micro Seiki DD-40, you have three options:
1. Adjust the screw on the wand that contacts the crescent-shaped tonearm lift paddle. This screw may be covered in rubber (which can degrade over time), and changing its position affects the lift height.
2. Adjust the horizontally oriented screw near the tonearm lift mechanism. This screw lets you move the tonearm lifter rod slightly up or down.
3. Use the Allen wrench port near the base of the tonearm assembly to adjust the overall tonearm height.
These adjustments control how high or low the tonearm lifts and can be used to fine-tune its operation.
This answer is automatically generated