Advertisement
Thank you for your purchase of this new SUNPENTOWN product. Please read
thoroughly and retain this manual for future references.
CAUTION:
1. This appliance is intended for household only.
2. Never operate this unit if the cord is damaged. In case of damage, the cord must
be replaced by the manufacturer, an authorized service agency or a similarly
qualified electrician.
3. Close supervision is necessary when this item is used by or near children.
4. The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of appliance by a
person responsible for their safety.
Advertisement
Table of Contents
Related Manuals for SPT AC-2102
Summary of Contents for SPT AC-2102
- Page 1 Thank you for your purchase of this new SUNPENTOWN product. Please read thoroughly and retain this manual for future references. CAUTION: 1. This appliance is intended for household only. 2. Never operate this unit if the cord is damaged. In case of damage, the cord must be replaced by the manufacturer, an authorized service agency or a similarly qualified electrician.
- Page 2 IMPORTANT SAFETY INSTRUCTIONS Please read all instructions before using this product. Save these instructions for easy reference. When using electrical appliances basic precautions should always be followed to reduce breakage, risk of fire, electric shock and injury to persons including the following: ●...
- Page 3 PART LIST...
- Page 4 OPERATION Connect the plug to a 120V power outlet and the air cleaner will be on “stand by” status. Control Panel: Press the button to turn on the air cleaner. To turn off the air cleaner, press the button again. Press the button to select the fan speeds: LOW, MED (medium), HI (high), Turbo and Auto.
- Page 5 Remote control: Press the button to turn on the air cleaner. To turn off the air cleaner, press the button again. Press the button to select the fan speeds: LOW, MED (medium), HI (high), Turbo and Auto. Note: When the “Auto” mode is selected, it takes three minutes for the air sensor to warm up.
- Page 6 REPLACING FILTERS When the “HEPA” indicator lights up, it means the HEPA Filter has been used for 8000 hours and needs to be replaced. When the “Carbon” indicator lights up, it means the Activated Carbon Filter has been used for 2000 hours and needs to be replaced. The steps to replace the filters: 1.
- Page 7 turn. Select the filter you have just replaced and hold the reminder button till the indicator stops flashing. 3. The selected reminder(s) are reset and recalculates the working time. Note: • Make sure to turn off the power and unplug the unit before replacing the filters. •...
- Page 8 • Incidental or consequential damage caused by possible defects with this product. • Damage to product caused by improper power supply voltage, accident, fire, floods or acts of nature. • Failure of product resulting from unauthorized modifications to the product. •...
Need help?
Do you have a question about the AC-2102 and is the answer not in the manual?
Questions and answers