Advertisement
INSTALLATION, OPERATION AND CARE OF :
TSA8002 DOUBLE PLATE ELECTRIC STOVE
UNPACKING: Unpack the product and check for any damage incurred during
transit. This should be reported to the responsible carrier, railway or postal
authority, and a request for a damage report should be made
THESE INSTRUCTIONS MUST BE FOLLOWED FOR US
TO GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM
!
FOR PROTECTING AGAINST LOSS FROM CONCEALED
DAMAGE. THE FORM FOR FILING SUCH A CLAIM WILL
BE PROVIDED BY THE CARRIER.
GENERAL INSTALLATION AND OPERATION INSTRUCTIONS:
1. The top working surface has a heat resistant coating. Before using the sealed
hotplate for the first time, it should be heated for +/- 5 minutes at setting no. 2.
This will enable the protective coating to harden and burn off.
2. Use only good quality pans on the sealed hotplates. They should have a stable
bottom to ensure the greatest possible contact with the sealed hotplate during
operation. This will result in maximum use of energy.
3. Use pans of the correct diameter only. They should cover the sealed hotplate
like an umbrella to allow any spillage to flow off easily.
IT IS ESSENTIAL TO MAKE SURE THAT THE INCOMING
VOLTAGE IS THE SAME AS THE RATED VOLTAGE OF THE
!
OF THE UNIT AS FOUND ON THE SERIAL PLATE. THE
SERIAL PLATE IS LOCATED AT THE REAR OF THE UNIT
ADJACENT TO THE INCOMING CABLE ENTRY.
Page 1
Page 6
Advertisement
