Remote Control Push-Buttons - McIntosh MVP871 Owner's Manual

Use to select NTSC or PAL
video output format
Use to access the standard or
one of five preset user defined
video settings
Access any numbered
operating function
Use to Clear the last
programmed track
Press to select between
various on-screen pag-
es of information on
DVD-Audio Discs
Return to the previous
setup menu screen
Use to move the on-
screen cursor up, down,
left, right; also use to
select the highlighted on-
screen menu item
Use to select various disc
information including time.
It is displayed on-screen and
on the Front Panel Alphanu-
meric display
Starts Playback of a disc and
allows moving forward or back-
ward one chapter at a time on
a DVD-Video; or one track at
a time on DVD-Audio, SACD
and CD Discs
Press for random playback
of tracks from Video and
Audio CDs
Press to enlargen the video
image from the disc
Use to mark up to five
starting points on a disc
Selects the video sig-
nal output at the HDMI
Output
Note: Push-buttons whose function is not identified above are for use with other McIntosh Components
16
Use to change the brightness of
the Front Panel Alphanumeric
Display from bright to off
Select a different
picture Angle
Use to select one of
various repeat modes
��������
��������
Use to set a starting and ending time segment
on a disc for continuous repeat play

Remote Control Push-Buttons

Use to toggle the
power On and Off to the
MVP871
Use to access the Setup
Menu
Use to switch power On
and Off to the MVP871
To access Track Numbers on
CDs and DVD-Audio Discs
greater than 10
Use to view on-screen the current
title, chapter, group or track number
along with direct access to change it
using the number push-buttons
Use to view and/or change the on-
screen subtitle language
Use to view or change the current
Audio Selection
Access the on-screen Top Menu
from the disc (disc dependent)
Access the on-screen Disc
Menu from a DVD disc
Use to quick stop, full stop or pause
the disc playback. Also use to activate
the Still Image Video Mode
Move forward or backward through
a disc chapter or track, also use to set
the Still Video Image step rate
Use to preselect (program) from
an audio disc the desired tracks for
playback
Use to review the preselected
tracks from the disc on the
Front Panel Alphanumeric
display, while in the program
mode
Selects the SACD or CD Audio
Layer from a hybrid disc
Selects the video signal output
resolution at the HDMI Output