Subscribe to Our Youtube Channel
Related Manuals for Promowide HP990
Summary of Contents for Promowide HP990
- Page 1 HP990 2.4GHz Digital Wireless Headphone User’s Manual Please read before using the equipment...
- Page 2 INTRODUCTION This 2.4GHz Digital Wireless Headphone uses latest digital wireless technology that enables you to enjoy music and TV sound anywhere inside your home. Simply connect the transmitter to a desired audio source: DVD player, CD player, TV set, VCR or Hi-Fi system. Without complicated wiring and installation with your Audio/Video equipments and rear channel amplifier, the system enables you to enjoy thrilling, lifelike sound in minutes.
- Page 3 COMPONENT PART LIST A) TRANSMITTER 1. Power / Signal indicator. 2. Charging indicator. 3. Charging pins. 4. Audio IN socket. 5. DC IN socket. B) HEADPHONE RECEIVER 6. Volume Up Control. 7. Volume Down Control. 8. Volume & Signal LED indicator. 9.
- Page 4 INSTALLATION TRANSMITTER 1. Connect the supplied AC/DC power adapter to an electrical wall outlet. 2. Plug the AC/DC power adapter in the DC jack located on the rear of the transmitter. 3. The rear of the transmitter has one audio cord that can be connected to audio output jack VCR,...
- Page 5 OPERATION Transmitter 1. Turn on the audio source (TV or audio component) to which the transmitter is connected with. The Signal / Power LED (Red) on the transmitter will light up when it receives the audio signal. Headphone 1. Turn on the headphone by pressing the Power button. The POWER LED (Red) will light up, the green LED will be flashing until signal link between transmitter and receiver is established.
- Page 6 4. Charging the batteries a) Turn OFF the headphone first. b) Place the headphone on the transmitter charging cradle. The charging process begins automatically, and the green LED will light up when the charging contacts of transmitter and headphone are made successfully. When the charging process is completed, the green LED will turn off.
- Page 7 Important: 1. Switching Off a) For protection of the transmitter and power saving, the transmitter will switches off automatically if there is no audio source signal for 3 minutes. If the audio source signal returns, the transmitter will automatically switches back on. Then, power on the headphone again. b) The headphone will switch off automatically if there is no signal from the transmitter for 2 minutes.
- Page 8 TECHNICAL SPECIFICATIONS Transmission Mode UHF stereo Carrier Frequency 2.4GHz Digital Operation Voltage Transmitter, DC 9V 400mA Headphone, 3 x AAA size Rechargeable NiMh batteries (included) Frequency Response 30Hz – 24KHz Distortion 0.4% S/N Ratio 80dB Operation Distance Up to 200 feet WARNING : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to...
Need help?
Do you have a question about the HP990 and is the answer not in the manual?
Questions and answers