28: Model Reset; To Reset A Model Memory - DSM JR 12X Instruction And Programming Manual

28: Model Reset

Model Reset is used to reset all programming to factory default
settings. When setting up a new model it is important to
reset all parameters to their default or factory settings before
proceeding with any other programming. This is to ensure that
there are no programming values or functions active from a
previous model or programming session.

To Reset a Model Memory

1. In the SYSTEM MODE, highlight and select MDL Reset
using the Selector.
2. Press the CLR button that is next to RESET on the display.
3. Press the lowermost button next to YES on the display to
reset all data for this model.
4. Return to the SYSTEM Menu by pressing the LIST button.
A-9