Advertisement
operatIon InstructIons
Figure 1
Threaded Bolt (Large) (3)
Tabs
Battery Compartment Cover (16)
1.
Remove Battery Compartment Cover (16)
using small straight slot screwdriver (not
supplied) to depress the four tabs attached to
the Battery Compartment Cover (16). Slide
it apart from the Battery Compartment (4).
See Figure 1.
Figure 2
Battery Compartment (4) Batteries (7)
Battery Compartment Cover (16)
2.
Insert the three AA Batteries (included) into
the Battery Compartment (4). Follow the
polarity markings stamped into the plastic
inside the Battery Compartment (4). Place
two Batteries (bunk bed style), with the bot-
tom Battery following the polarity markings
and the top Battery reversing the polarity of
the bottom Battery. See Figure 2.
3.
Replace the Battery Compartment Cover (16)
by snapping the four tabs into place.
SKU 98625
For technical questions, please call 1-800-444-3353.
4.
Loosen the Threaded Bolt (Large) (3) wide
enough to slide the Mounting Socket (17)
onto a stable platform away from the heat of
the BBQ. Tighten the Threaded Bolt (Large)
(3) so the platform is held snugly in place.
See Figure 2.
5.
The Flexible Shaft (18) allows a number of
different positions so the BBQ Fan and/or
L.E.D. Light can be most effectively used.
6.
Turn on the BBQ Fan With Light by de-
pressing the Push Button (15), once for just
LIGHT, twice for just FAN and three times for
both LIGHT and FAN.
7.
Press once to turn off.
8.
The BBQ Fan With Light can also be used
indoors as a reading Fan/Light or in the
workshop if extra light is needed.
9.
Dispose of Batteries properly in accordance
with all local ordinances.
please read tHe FollowIng
careFullY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS
PROvIDED THE PARTS LIST AND ASSEMBLy DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLy.
NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANy REPRESENTATION OR WARRANTy OF ANy
KIND TO THE BUyER THAT HE OR SHE IS QUALIFIED
TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT
HE OR SHE IS QUALIFIED TO REPLACE ANy PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
By CERTIFIED AND LICENSED TECHNICIANS, AND NOT
By THE BUyER. THE BUyER ASSUMES ALL RISK AND
LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
record serial number Here:
note: If product has no serial number, record
month and year of purchase instead.
note: Some parts are listed and shown for illustra-
tion purposes only, and are not available
individually as replacement parts.
Page 2
Advertisement
