Repair And Maintenance - Razor DUNE BUGGY Owner's Manual

REPAIR AND mAINTENANCE

Turn power switch off before conducting any maintenance procedures.
q Replacing the Fuse
TURN
POWER
OFF
1
Make sure the power switch is
turned off.
4
Close the fuse box.
q Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and
purchase.
1
Using a bicycle style tire pump
equipped for a Schrader-type valve,
inflate the tires to the PSI
indicated on the sidewall of the
tires.
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
2
Open fuse box located on the
battery.
Amperage
number
3
Remove fuse and replace with a
new one of equal amperage.
Note: Amperage is located on top
of fuse. Fuse must be replaced with
one of equal amperage.
3
WARNING: To prevent
shock make sure power is in the
"off" position and charger is not
plugged into unit while conduction
any maintenance procedures.
Note: The pressurized air supplies
found at stations are designed to
inflate high-volume automobile
tires. If you decide to use such
an air supply to inflate your Dune
Buggy tires, first make sure the
pressure gauge is working, then
use very short bursts to inflate to
the correct PSI. If you inadvertently
over-inflate the tire, release the
excess pressure immediately.