Samsung SGH-X530 Service Manual page 21

5
1) Joint the 6 screws with the slide stopping JIG.
※ caution
1) Fix the slide tightly.
7
①
1) Put the NAVY key like the picture below.
2) Put the PBA first, and then MOT, SPK.
※ caution
1) Be careful the wire.
This Document can not be used without Samsung's authorization
②
SAMSUNG Proprietary-Contents may change without notice
6
①
②
1) Fold the FPCB like the picture below.
2) Insert the LCD FPCB to the CONNECTOR
along the SILK LINE, SOLDERING 2 points and
then put the green TAPE.
※ caution
1) Be careful for the FPCB's crack
8
①
1)Insert the SPK RUBBER like the picture below.
2)Lock the PBA on the left side HOOK and then
put the MIC.
※ caution
1) Be careful the rubber's folding.
5-7
Exploded View and Parts List
②