Do you have a question about the 332R and is the answer not in the manual?
Questions and answers
Richard
July 9, 2025
Just bellow presser plate,part that walks material,that part front portion under side,single screw about 1 inch long ,about 1/8 thick fine thread,with a nut ,to lock in place,to be adjusted with only small screwdriver
1 comments:
Mr. Anderson
August 28, 2025
The part under the presser plate of a Consew sewing machine with part number 332R that helps walk the material and is adjusted with a small screwdriver is the feed dog. The feed dog is a toothed metal piece that moves fabric through the machine during sewing. Its height and alignment can be adjusted with a small screwdriver to ensure proper fabric feeding and stitch quality.
Heavy duty high speed two needle
angular stitching split needle bar, drop feed, needle feed compound feed, alternating presser feet, lockstitch machine (48 pages)
Need help?
Do you have a question about the 332R and is the answer not in the manual?
Questions and answers
Just bellow presser plate,part that walks material,that part front portion under side,single screw about 1 inch long ,about 1/8 thick fine thread,with a nut ,to lock in place,to be adjusted with only small screwdriver
The part under the presser plate of a Consew sewing machine with part number 332R that helps walk the material and is adjusted with a small screwdriver is the feed dog. The feed dog is a toothed metal piece that moves fabric through the machine during sewing. Its height and alignment can be adjusted with a small screwdriver to ensure proper fabric feeding and stitch quality.
This answer is automatically generated