Page 2
The status LED should light up red at first, then turn green after a few age are present in the box. Refer to Figure 1. If anything is missing, contact Orion seconds. If it does not, turn the power off for a few seconds, then turn it on Technical Support at (800) 676-1343 or support@telescope.com.
Page 3
On most telescopes, the RS-232 port is a 4- or 6-wire modular (“telephone”) wireless device. jack. On all Orion GoTo telescopes, the RS-232 port is located on the hand controller next to the port for the coil cable that connects the hand controller StarSeek Wi-Fi generates an “Ad Hoc”...
This will restore StarSeek Wi-Fi’s “factory default” inserted in the correct (+ and -) polarity orientation. If StarSeek Wi-Fi is still settings. You can then re-configure your StarSeek Wi-Fi unit using the not working with fresh batteries, contact Orion Technical Support. instructions above. •...
During this warranty period Orion Telescopes & Binoculars will repair or replace, at Orion’s option, any warranted instrument that proves to be defec- tive, provided it is returned postage paid to: Orion Warranty Repair, 89 Hangar Way, Watsonville, CA 95076.
Need help?
Do you have a question about the STARSEEK 5685 and is the answer not in the manual?
Questions and answers