Philips 107P User Manual page 62

107P The OSD Controls
4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN
CONTROLS will be highlighted...
After returning to MAIN CONTROLS . . .
. . . to continue to INPUT SIGNAL SELECTION, press the
SIGNAL SELECTION is highlighted. Next, follow steps 3 - 5 under INPUT SIGNAL
Smart
SELECTION.
Help
. . . to exit completely, press the
INPUT SIGNAL SELECTION (Not available in all models)
INPUT SIGNAL SELECTION determines what you see on the screen. The default setting is INPUT A, but if
the video input signal is different that the output signal, you may want to change it to INPUT B.?
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the button until INPUT SIGNAL SELECTION is highlighted.
3) Press the button. The INPUT SIGNAL SELECTION window appears.
file:///G|/manual/english/107P/osd/osd_cont.htm (4 of 32) [10/16/1999 6:30:41 AM]
button
RETURN TO TOP OF THE PAGE
button until INPUT