Three-Way Calling - GMC 2016 Intellilink How To Use Manual

84 Phone

Three-Way Calling

Three-way calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier to work.
To start a three-way call while in a
current call:
1. In the Call View, select Add to
add another call.
2. Initiate the second call by
selecting from RECENT,
CONTACTS, or KEYPAD.
3. When the second call is active,
press Merge to conference the
three-way call together.
4. Once all calls are merged, the
Merge button becomes an
Unmerge button. Press to
unmerge the calls. Some
wireless service carriers may
not allow a merged call to
become unmerged.
Ending a Call
i
Press on the steering wheel
controls.
Touch End on the center stack
display to end all existing calls,
or touch End next to a call to
end only that call.
Some wireless service carriers may
not allow a merged call to become
unmerged.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Touch the Phone screen
button.
2. While in the Call View, touch
l
to raise the Interaction
Selector.
3. Select Keypad and enter the
number.
Voice Mail
The default voice mail number is the
phone number of the currently
connected phone. The voice mail
number can be changed in
Bluetooth settings.
To dial a voice mail number:
1. Touch the Phone screen
button.
2. Select Voice Mail.
3. Select Call.
4. Enter the DTMF tones using
the keypad if needed.
Bluetooth (Voice
Recognition)
Using Bluetooth Voice
Recognition
To use voice recognition, press the
g
button on the steering wheel. Use
the commands below for the various
voice features. For additional
information, say Help while in a
voice recognition menu. See Voice
Recognition 0 73 for help using
voice recognition commands.
Making a Call
Calls can be made using the
following commands.