Advertisement
PROBLEM
WRINKLING
IN
PERMANENT
PRESS
AND "NO-IRON"
ITEMS (continued)
.-
POSSIBLE
CALSE
AXD REJIEDY
Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent. a~foidthe use of a high-carbonate
detergent.
c Failure to use fabric softener. Proper use of fabric softener will minimize wrinkling.
To remove wrinkles:
Retumble on "Permanent Press'" setting.
Rerinse and dry on "Permanent Press" setting.
c If unsuccessful, retumbie cm normal
temperature
for 10-12minutes and hang
immediately.
Iron carefully.
Send to dry cleaners for pressing.
Some wrinkles may remain which cannot be removed;
*NOTE: If you k~llow gmxi luundrv procedures and Permanent Press clothes still come
out wrinkled. the finish muy not be good quality. Also. in permanent press synthetic
cotton blends. the cotton p(~rti~lnof the
fabric cm mwntwdly wetir awuy leaving only the
synthetic. Since it's the cott~ln portion which is treated for Pcrrnancnt Press. a loss or
decrease tJf Pcrmwwnt Press pcrfbrnmnce will result.
If you need more help.. call,
toll free:
GE Answer CenterR'-
800.626.2000
consumer information service
-,
I
Advertisement
