GE DDE5700G Use And Care Manual page 12

The Problem Solver
PROBLEM
WRINKLING IN
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
If you need more help.. call, toll free:
GE hswer Center@
consumer information service
(continued)
POSSIBLE CAUSE AND REMEDY
. Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
Failure to use fabric sofiener. Proper use of fabric softener will minjmize wrintiing.
remove wrinkles:
. If unsuccessful, retumble on normal temperature for 10-12
immediately.
Iron carefully.
Send to dry cleaners for pressing.
Some wrin~es may remain which cannot be removed;
*
laundry procedures and Permanent Press clothes still come
NOTE
:
out wrin~ed, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it's the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
12
minutes and hang