Eleaf iStick User Manual
Hide thumbs
Also See for iStick:
- User manual (52 pages) ,
- User manual (2 pages) ,
- User manual (14 pages)
Advertisement
Notice for Use
Thank you for choosing Eleaf products! Please read this manual carefully before use so
as to use correctly. If you require additional information or have questions about the
product or its use, please consult your local agents, or visit our website at
www.eleafworld.com.
Product Introduction
iStick is an knock-out product implementing the latest technology with a metallic
appearance. Its trait is the appearance artful, easy to take. There are four colors
for your option: black, silver, red and blue. Meanwhile, the output wattage is
strong, up to 20W. The highlight is the incremental OLED screen displaying
battery condition, resistance, wattage and voltage. You can know them clearly at a
glance. The voltage is adjustable vary from 3.0V to 5.5V according to your vaping
habit.
Parameter
Size: 75mm*21mm*32.8mm
Color: black, sliver, red, blue
Capacity: 2200mAh
Thread Type: 510 Thread
How to use
Press the square button for five times to turn on the battery, and then long press the
square button to get a puff.
up arrow button
down arrow button
Switch the VV/VW mode: Press the square button for three times to switch the VV/VW
mode when the battery is turned on.
Adjust the voltage/wattage: Press the plus or minus direction button to increase or
decrease the voltage/wattage. The voltage is adjustable vary from 3.0V to 5.5V, and the
wattage can be up to 20W. Long press the plus or minus direction button to enter the
AUTO mode, increase or decrease voltage/wattage by 0.1V/W. Press the plus or minus
direction button again, increase or decrease voltage/wattage by 0.2V/W. If still press the
plus or minus direction button one more time, then increase or decrease voltage/wattage
by 0.5V/W. Press the plus or minus direction button to choose the voltage/wattage you
want. If you want to choose the voltage/wattage halfway, just press the opposite direction
button to stop the increasing or decreasing voltage/wattage.
the OLED screen
iStick
User Manual
the square button
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eleaf iStick
Summary of Contents for Eleaf iStick
- Page 1 User Manual Notice for Use Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com.
-
Page 2: How To Charge
Eleaf brand. Precautions a) Only have your iStick repaired by Eleaf. Do not attempt to repair the unit by yourself as damage or personal injury may occur. b) Do not leave the iStick in high temperatures or damp conditions, otherwise it may be damaged.
Need help?
Do you have a question about the iStick and is the answer not in the manual?
Questions and answers
I've got a mini and am confused about voltage vs temperature. Help
On the Eleaf iStick Mini, voltage settings control the power delivered directly based on voltage output, while temperature settings regulate the coil's heat level in temperature control (TC) mode. Voltage mode keeps output constant regardless of coil type, while temperature mode adjusts power to maintain a set temperature, depending on coil material (e.g., Ni, Ti, SS).
This answer is automatically generated
Display says “No Atomizer”. What does this mean?
"No Atomizer" on the Eleaf iStick display means the device is not detecting a connected atomizer. This can happen if the tank is not properly connected, if the 510 pin in the mod is not making contact with the tank’s 510 connection, or if no clearomizer is installed.
This answer is automatically generated
How to turn on
Press the square button five times to turn on the battery.
This answer is automatically generated
Hi I need to change my coil in I 40 please can you guide me with what to do please.