Advertisement
Quick Links
TROUBLESHOOTING
If you lose suction while vacuuming turn o your unit
and try the following:
1. Check vacuum hose for obstruction. If needed the hosing can be
removed by depressing the the button (image below) where the hose
connects to the unit. Once removed, the hose can be checked by drop-
ping a coin through from one end to the other.
2. Check plastic tube (#10) for obstructions.
3. Check tools to make sure openings are not blocked.
4. Make sure that bag (#12 or #13) is not full.
5. Check Hepa Filter (#3), if it has turned brown it will need to be
replaced. Make sure lter is replaced after every 6th bag replacement.
LIMITED WARRANTY
Bacpac Back Pack Vacuum Cleaner Limited One Year Warranty
IMPORTANT: KEEP YOUR BOX
Upon receipt, Bacpac will repair or replace the unit free of charge from date of
purchase for one year by the original owner. Warranty applies to household
use only and not for commercial or rental applications. The warranty does not
cover damage or malfunction caused by neglect, negligence, abuse, or
unauthorized repair.
For any question or concerns please contact us at:
1 (800) 727-7129
10606 Blu Bend Drive
Austin, Texas 78753
BACK PACK VACUUM CLEANER
USER MANUAL
JL-B4001
TM
Advertisement
Summary of Contents for Ningbo Jinlong BacPac Ero JL-B4001
- Page 1 TROUBLESHOOTING If you lose suction while vacuuming turn o your unit and try the following: 1. Check vacuum hose for obstruction. If needed the hosing can be removed by depressing the the button (image below) where the hose connects to the unit. Once removed, the hose can be checked by drop- BACK PACK VACUUM CLEANER ping a coin through from one end to the other.
- Page 2 READ ALL INSTRUCTIONS BEFORE USING SAVE THESE INSTRUCTIONS Getting to know your Bacpac Vacuum Cleaner WARNING - To reduce the risk of re, electric shock, or injury: Design Features 1. Do not leave vacuum cleaner when plugged in. Unplug from outlet when •...
- Page 3 PREVENTION A FEW MINUTES FOR YOUR SAFETY SAFETY INSTRUCTIONS Switch o the vacuum cleaner immediately if the air intake, the oor brushes, or the tube become blocked. Before starting the vacuum cleaner Danger from electricity up again remove the object causing the blockage: This device uses a dangerous electrical voltage.
- Page 4 ASSEMBLING THE VACUUM CLEANER CONT. ASSEMBLING THE VACUUM CLEANER CAUTION! 4. After vacuum cleaning 1) Press the switch button on the handle, unplug the power cable, wrap Before assembling or disassembling the accessories always the cable around the holder, then attach the handle and hose onto the ensure that the vacuum has been unplugged.