Sanyo CE32WN5F-C Service Manual page 7

To select the mode and service item and change data value
+ Highlight the desired adjustment mode by using the P
+ To select the adjustment item, use the P
+ To change the service data, use the Volume -(LEFT) or Volume + (RIGHT) button.
+ The data which is set in the service mode is stored into the memory IC automatically.
REGULAR mode
REGULAR
1, AGC
Adjustment No.
and Item name
Exit from the Service Mode
+ Press the RECALL
Re tuning channels
1. Press the
MENU/
i
2. Press the button.
3. Highlight "Tuning" (you may need to use the P
4. Press the button.
5. Highlight "Auto" (you may need to press the
6. Press the P button to select CH:***
7. Press the button.
8. The TV will auto sort the channels
Re setting plug and play
Repeat steps 1 to 7 above but before any stations are found press the
Switch off the TV set with the Mains ON/OFF button. When the TV set is next switched on it will plug and play.
or P
38
Adjustment Data
?
button or turn off the TV set by using the Mains switch.
button, use the P button to highlight "Preset".
or P button and then press the F/OK button.
button.
Adjustment No.
and Item name
button)
button)
MENU/
-7-
IMAGE mode
IMAGE
1. P V-P 1F
Adjustment Data
button to cancel presetting.
i
C3YFV