Advertisement
7. Connect the Battery Cable to the Connector. Make sure the cable is routed inside the correct
notch.
8. Replace the Cover.
Important Notes:
1. The battery will be partially charged when you receive it. It is recommended that you charge
the battery using the AC adapter for 1 hour and 45 minutes or with the USB cable for 10
hours before using it the first time.
2. The battery is protected against overcharging so you can leave power or USB connected
even after it is fully charged.
3. When the battery is installed, if both USB cable and AC Power are disconnected the printer
will automatically shut off completely to conserve battery power.
Cable should be routed
inside this notch.
Advertisement
