Table of Contents
Advertisement
How to Use the Bleach Dispenser
Use this dispenser with
liquid bleach only.
If you prefer to
use powdered
bleach, pour it
into the wash
basket along with
your detergent. Do
not pour powdered bleach
into the bleach dispenser.
Measure bleach carefully.
Here are some recommended amounts:
How to Use the Fabric Softener Dispenser
Position the Fabric
Softener Dispenser on
the agitator.
Pour manufacturer's
recommended amount
of fabric softener into
a standard measuring cup.
Add enough water to fill the cup 1/2 full.
Pour the diluted softener into the dispenser.
The fabric softener will automatically be dispensed
at the proper time.
How to Use the Soak Cycle
SOAK CYCLE temperature
will automatically be cold.
For a hot or warm soak,
set the WasMRinse Temp.
control to HOT/COLD or
WARM/COLD and turn
the Cycle Selector knob
to MEDIUM cycle setting.
8
(continued)
HIGH WATER LEVEL—1 M cup (310 ml) liquid
LOW WATER LEVEL—2/3 cup (170 ml) liquid
Pour measured amount of liquid bleach directly
into bleach dispenser.
Do not overfill or allow dispenser to ovetiow.
Avoid splashing. Undiluted bleach can cause fabric
damage.
Never pour undiluted liquid bleach directly onto
clothes or into the wash basket.
Do not stop the washer during the first spin.
This will cause the dispenser to empty too soon.
Do not use the Fabric Softener Dispenser with the
Soak Cycle.
If the dispenser gets clogged, soak it in a solution of
1 cup (240 d) water and 1 cup (240 ml) alcohol.
Start the washer. After washer fills and begins to
agitate, push in the Cycle Selector knob and turn
to SOAK CYCLE. Pull out the Cycle Selector knob
to complete the cycle.
For an extended soak, allow the washer to fill and
agitate for a few minutes to dissolve the soaking
agent. Then push in the Cycle Selector knob to stop
the washer (keep lid closed) and allow to soak for as
long as desired. After desired soak period, pull out
the Cycle Selector knob to complete the cycle.
Advertisement
Table of Contents
