RCA BVLR333ET Owner's Manual page 15

Problem PossibleCauses What to Do
Try a fabric softener.
Adjust controls for less drying.
No fabric softener wasused
Try a fabric softener.
Synthetics, permanentpress Try a fabric softener.
andblendscancausestatic
Improper sorting
Separateheavyitems from lightweight items
(generally, a well-sortedwasher load is a
well-sorted dryer load).
Large loads of heavyitems
Large, heavyloads contain more moisture
(like
beach towels) and take longer to dry. Separate large, heavy
items into smaller loads to speed drying time.
Controlsimproperly set
Match control settings to the load you
are drying.
Lit
filter is full
Clean lint filter before everv load.
Improper or obstructed
Check installationinstructions for proper
ducting
ducting/venting.
Make sure ducting is clean, free of kinks
and unobstructed.
Check to see if outside wall damper
operates easily.
See the Venting the Dryer section.
Blown fuses or tipped
Replace
fuses or reset circuit breakers. Since
circuitbreakers
most dryers use 2 fuses/breakers, make sure
both are operating.
Overloading/
Do not put more than one washer load in
combiningloads
the
dryer at a time.
Underloading
If you are
drying only One
or two items,
add a few items to ensure proper tumbling.
15