Linksys WRT54G3GV2-VF Quick Installation page 6

Broadband WAN and 3G/UMTS Broadband
D.
Connect the other end of the
yellow cable to one of the yellow
Ethernet ports labeled 1- on the
side panel of the Router.
Repeat steps C and D to connect
additional computers or other
devices to the Router. (Additional
network cables are not included.)
Click Next.
E.
Connect the power adapter to the
Router's Power port. Plug the cord
into an electrical outlet (if needed,
attach the included, appropriate
power plug adapter).
Click Next.
F.
The Power LED will flash for about
a minute during the self-test. It will
be solidly lit when the self-test is
complete.
If the Power LED does not stop
flashing, refer to "Appendix A:
Troubleshooting" in the User Guide
on the CD-ROM.
Click Next.

Connect the Network Cable to the Router Connect the Network Cable to the Router
Connect to Power Connect to Power
Check the Router's Status Check the Router's Status