Maytag MEDX550XW Use And Care Manual page 8

4.
Select the desired cycle
Select the desired cycle for your load. See the "Cycle Guide"
or the display for more information about each cycle.
5.
Setting modifiers
The default cycle settings will be shown. For some cycles, you
may select alternate settings by pressing the button for that
setting. Time adjusts for Timed Cycles only.
NOTE: Not all modifiers are available with all cycles.
Temp Level
Press the TEMP LEVEL button to change the drying temperature
from the default setting.
Wrinkle Prevent feature
Get up to 60 or 150 minutes for models with two choices,
n
90 minutes for models with only one choice of heat-free,
periodic tumbling at the end of a cycle. Press the WRINKLE
PREVENT button to turn ON or OFF at any time before the
cycle has ended.
The WRINKLE PREVENT feature is preset to "OFF." If selected
n
for other cycles, the WRINKLE PREVENT feature setting will
remain "ON" the next time that cycle is selected.
8
6.
Select cycle options (if desired)
Add additional options by pressing the button.
NOTE: Not all options and settings are available with all cycles.
7.
Press START/PAUSE to begin cycle
Press the START/PAUSE button to begin the cycle.
8.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle has completed to reduce
wrinkling. Use the Wrinkle Prevent feature to avoid wrinkling
when you are unable to remove a load from the dryer as soon as
it stops.