Maytag NEPTUNE MD75 User Manual page 14

C
ONTROLS AT A
Press "start/pause" or
change your selection below.
Time
options
wrinkle release
18
18 minutes
minutes
continue
regular
temperature
Touch the up or down arrow to
set the time to tumble. The
time will increase or decrease
by one minute increments.
Press "Continue" when done.
S F U
ETTING RESHEN
Freshen Up – the Freshen Up cycle is designed to activate a fabric softener sheet. There is 5 minutes of heated tumble followed by
10 minutes of tumble in unheated air.
Home
sensor dry
air fluff
time dry
(no heat)
more cycles favorites
Step 1
Touch "More Cycles" on the
Home screen.
Press "start/pause" or
change your selection below.
Time
options
freshen up
15
15 minutes
minutes
continue
extra low
temperature
Touch the up or down arrow to set
the time to tumble. The time will
increase or decrease by one minute
increments. Press "Continue"
when done.
G
LANCE
CONT
Press "start/pause" or
change your selection below.
Temperature
wrinkle release
18 minutes
regular
delicate
regular
temperature
Touch the appropriate tempera-
ture for the load.
P
More Cycles
wrinkle release
freshen up
Dryel
Step 2
Add a fabric softener sheet to the
load. Select "Freshen Up".
Press "start/pause" or
change your selection below.
Temperature
freshen up
15 minutes
regular
delicate
extra low
temperature
Touch the appropriate tempera-
ture for the load.
.
options
medium
extra low
Options Screen – The following options may be added
to customize your Wrinkle Release Cycle:
• "Wrinkle Prevent"
• "End of Cycle Chime"
• "Remind Chime"
See page 7 for a detailed description of these options.
When the desired selections are made, touch
"Continue" to see the review screen once again.
change your selection below.
freshen up
15 minutes
extra low
temperature
®
Step 3
Review Screen – The default settings for Freshen Up are
15 minutes of tumble using extra low temperature heated
air. You may press Start/Pause to begin Freshen Up or
select any of the areas on the touchscreen to further cus-
tomize the Freshen Up cycle.
options
medium
extra low
Touch the appropriate options then press "Continue".
13
Options
loud end
of cycle chime
continue
Press "start/pause" or
options
Options
loud end of
cycle chime
remind chime
on off
continue