Macintosh Os X - Maxtor FireWire 800 User Manual

Macintosh OS X

Step 1. Install the Software
Software installation: Do not press the Maxtor OneTouch™
button until instructed by the User's Guide or installation
software. Please quit all applications before starting the
installation process. Do not remove the installation CD until
after completing the Maxtor OneTouch setup.
1. Turn on your computer.
2. Insert the Maxtor Installation CD into your CD-ROM drive.
After a few seconds, the Install CD should appear on your
Macintosh's desktop.
3. Open the Install CD Icon.
4. Find the folder appropriate for your language and open it.
5. Open the folder named OS X.
6. Double-click the Install Retrospect Express icon.
The Authenticate window will open.
7. Enter your Name (if necessary) and Password for your
OS X system.
(This is the Name and Password you set up when you originally
installed OS X)
Click OK.
The Retrospect Express Installer will open.
8. Click Continue.
The license screen will appear.
9. Review license agreement and Accept to continue.
The Install Retrospect Express screen will appear.
10. This screen allows you to specify what type of installation you
want and where. It is automatically set up to do a Full Installation
(recommended) into the Applications folder on your Macintosh.
You can select the Custom Installation, using the Easy Install
menu (recommended), as well as change the location of the
installation using the Install Location menu at the bottom of
the screen.
When you are ready, Click Install.
The installation will begin.
11. When the installation is complete, the Installation was
successful screen should appear, asking you to Restart.
12. Click Restart.
Installing Your Drive 7
2