Maxtor FireWire 800 User Manual page 13

6. The remaining space will be allocated to a second partition that
can be used for general storage, enter the name Maxtor Extra
Storage. When finished, click the OK button.
7. A warning message will appear. Click the Partition button
when you are ready.
8. After the partitioning process is completed, Quit Apple's Disk
Utility. You should now see the two partitions as drive volumes
on your Desktop.
9. Go to the Apple menu and select System Preferences. Select
Security, click on the Turn Off FileVaulting button, then Quit
System Preferences.
10. Select the "Maxtor Bootable Backup" drive. Then from the
Finder, select File and Get Info.
11. From the drive's Info Window, click on Ownership &
Permissions and remove the check from Ignore ownership
on this volume. Type in your password and close the info
window.
Set up Retrospect Express and back up your computer
1. Push the button on the front of your drive.
A window appears that says: 'You need an administrator
password to start Retrospect.'
Enter the Name and Password for your OS X system.
(This is the Name and Password you set up when you originally
installed OS X)
2. Click OK.
The next screen will appear:
'Would you like to register Retrospect Express now?'
3. Choose Register Now, Register Later or Already Registered.
If you chose Register Now, go to the next step.
If you chose Register Later or Already Registered,
Retrospect Express will open. Go directly to Step 5.
4. Enter the required information on the form.
• Click Email to register via email
• Click Print to register via mail
• Click Register Later if you do not want to register now.
Installing Your Drive 11
2