Motorola Select 3000 Quick Refence Manual page 30

How to Enter Alphabetic Characters
When storing names in the Phone Book or creating text
messages, you can use the digit keys, 0 through 9, to
produce any letter in the alphabet.
For example, if you press 5 when you are prompted for an alpha
character, the first displayed character will be
produce K , another press will produce
use the letters on the digit keys and the chart as guides.
Press and hold any key to toggle between upper and lower case.
A
If the next character that you wish to enter is on the same key as
the previous character, press > to advance the cursor.
Otherwise, simply press the appropriate key.
Press > twice to produce a space.
A
If you make a mistake, you can go back to the incorrect character
by pressing <.
To remove a character from the display, position the cursor (
to the right of the character, then press C.
Press O to finish entering alphabetic characters.
28
Using the Options Menu
. Press 5 again to
J
L , and another press 5 . Simply
w
)
Available Characters
Use this chart as a guide for producing characters:
1
1 Space . ? ! , Ÿ
1 Space . ? ! , Ÿ
2
A B C 2 ± È
a b c 2 ± È
3
D E F 3 ¿ ¤
d e f 3 ¥ ¤
4
G H I 4 §
g h i 4 §
5
J K L 5
j k l 5
6
M N O 6 ] ¨
m n o 6 } ¨
7
P Q R S 7
p q r s 7
8
T U V 8 ^ Ω
t u v 8 ~ Ω
9
W X Y Z 9
w x y z 9
0
0 + - x * / = > < #
0 + - x * / = > < #
The upper line for each key shows the upper case characters.
The lower line for each shows the lower case.
& : " ( ) ' % ¢ ` @
& : " ( ) ' % ¢ ` @