Installing Windows; 64-Bit / 7 / 7 64-Bit; Vista Tm / Vista Tm 64-Bit With Raid - ASROCK IMB-A160-H User Manual

® TM

2.8.3 Installing Windows

8 / 8 64-bit / 7 / 7 64-bit / Vista /
TM
Vista 64-bit with RAID
®
RAID mode is not supported under Windows XP.
STEP 1: Set Up UEFI.
Press <F2> or <Delete> at system POST. Set RAID Mode in UEFI Setup
Utility > Advanced > Storage Coniguration > SATA Mode.
STEP 2: Use "RAID Installation Guide" to set the RAID coniguration.
Before you start to configure RAID, you need to check the installation
guide in the Support CD for proper configuration. Please refer to the
document in the Support CD, "Guide to SATA Hard Disks Installation and
RAID Coniguration", which is located in the folder at the following path:
.. \ RAID Installation Guide
® TM TM
STEP 3: Install Windows 8 / 8 64-bit / 7 / 7 64-bit / Vista / Vista 64-
bit on your system.
28