Technical Specifications For Avr-X1100W; Dimension For Avr-X1100W - Denon AVR-X1100W Service Manual

TECHNICAL SPECIFICATIONS FOR AVR-X1100W

n Audio section
• Power amplifier
Rated output :
Front :
80W+80W（8Ω、20Hz～20kHz with 0.08％ T.H.D.）
120W+120W（6Ω、1kHz with 0.7％ T.H.D）
Center :
80W（8Ω、20Hz～20kHz with 0.05％ T.H.D.）
120W（6Ω、1 kHz with 0.7 % T.H.D.)
Surround :
80W+80W（8Ω、20 Hz – 20 kHz with 0.08% T.H.D.)
120W+120W（6Ω、1 kHz with 0.7 % T.H.D.)
Surround back:
80W+80W（8Ω、20 Hz – 20 kHz with 0.08% T.H.D.)
120W+120W（6Ω、1 kHz with 0.7 % T.H.D.)
Output connectors : 4～16Ω
n Analog section
Input sensitivity/Input impedance : 200 mV/47 kΩ
Frequency response : 10 Hz – 100 kHz — +1, –3 dB（Direct mode）
S/N : 98 dB（IHF–A weighted, Direct mode）
n Video section
Input/output level and impedance : 1 Vp-p, 75 Ω
Frequency response : 5 Hz – 10 MHz — 0, –3 dB
n Tuner section
Reception frequency range : FM 87.5 MHz – 107.9 MHz(for E3)
Effective sensitivity : FM 1.2μV（12.8dBf）
AM 18 μV
50 dB sensitivity : MONO ― 2.8 μV (20.2 dBf)
S/N: MONO ― 70 dB (IHF–A weighted, Direct mode)
STEREO ― 67 dB (IHF–A weighted, Direct mode)
Distortion : MONO ― 0.7 % (1 kHz)
SRETEO ― 1.0 % (1 kHz)

DIMENSION FOR AVR-X1100W

Unit： Unit : in. (mm) Weight： 18 lb 15 oz (8.6 kg)
1 49/64 (45)
FM 87.5 MHz – 108.0 MHz(for E2,E1. E1C)
FM 76.0 MHz – 90.0 MHz(for JP)
AM 520 kHz – 1710 kHz(for E3)
AM 522 kHz – 1611 kHz(for E2,E1. E1C)
AM 522 kHz – 1629 kHz(for JP)
17 3/32 (434)
13 35/64 (344)
n Wireless LAN section
Network type
(wireless LAN standard): Conforming to Wi-Fi®z1
Security : WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency : 2.4 GHz
No. of channels : 1 – 11 ch (for E3)
1 – 13 ch (for E2, E1, E1C, JP)
z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
Logo are registered trademarks of the Wi-Fi Alliance.
n Bluetooth section
Communications system : Bluetooth Version 2.1 + EDR
Transmission power : Maximum 2.5 mW (Class 2)
Maximum communication range : Approx. 32.8 ft/10m 2 in line of sight
Frequency band : 2.4 GHz band
Modulation scheme : FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles : A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.4 (Audio Video Remote Control Profile)
Corresponding codec : SBC, AAC
Transmission range (A2DP) : 20 Hz - 20,000 Hz
n General
Power supply : (for E3) :
(for E2/E1) :
(for E1C) :
(for JP) :
Power consumption : 430W
Power consumption in standby mode : 0.1W
Power consumption in CEC standby mode : 0.5W
Power consumption in network standby mode : 2.7W
2 23/64
(60)
1 49/64 (45)
9
(Enhanced Data Rate)
AC 120 V, 60 Hz
AC 230 V, 50 Hz / 60Hz
AC 220 V, 50 Hz
AC 100V、50/60Hz