Hdmi/Dvi - Denon AVR-X1100W Service Manual

3. HDMI/DVI

3.1. No picture or sound is output (HDMI to HDMI)
No picture or sound is output.
Check the connection of the HDMI/DVI cable.
(1) Is the HDMI/DVI cable correctly inserted?
(2) Is an HDMI/DVI selector, repeater or image quality improvement
device being used?
(3) Is a certified HDMI cable (with the HDMI mark) being used?
(4) Is the HDMI/DVI cable shorter than 5m?
(5) Are a picture and sound output when a different HDMI/DVI cable is
used?
Check the Blu-ray/DVD player.
(6) Are the HDMI output settings of the Blu-ray/DVD player correct?
(7) If using a DENON Blu-ray/DVD player, is the "HDMI" indicator of
the fluorescent display lit?
Proceed to YES if using a Blu-ray/DVD player from another
company.
NO
(9) Is sound output from the speaker terminal of this unit when the
power of the TV is turned off or the cable connecting the TV to this
unit is removed?
YES
NO
YES
YES
NO
YES
YES
(8) Are a picture and sound output
when the resolution of the Blu-
ray/DVD player is changed?
NO
NO
(10) Are a picture and sound
output when a different Blu-
ray/DVD player is used?
NO
NO
Check the connection of the HDMI/DVI
cable.
YES
Remove all of these and connect only the
HDMI/DVI cable.
NO
Use a certified HDMI cable (with the HDMI
mark).
Replace the HDMI/DVI cable with one
NO
shorter than 5m (2m is recommended) and
check again.
YES
The HDMI/DVI cable is faulty.
NO
Check the instruction manual of the Blu-
ray/DVD player and set the HDMI output
correctly.
YES
Set the output resolution of the Blu-ray/DVD
player to a resolution supported by the TV.
YES
The Blu-ray/DVD player may not support the
HDCP repeater function.
Check with the manufacturer of the Blu-ray/
DVD player.
YES
The Blu-ray/DVD player is faulty.
76