Hardware Setup - Integra DTR-40.6 Advanced Manual

7.Hardware Setup

Multi Zone
Setting Item Default Value
Zone 2 Out Fixed
Zone 2 Maximum Off
Volume
Zone 2 Power On Last
Volume
Zone 3 Out Fixed
Zone 3 Maximum Off
Volume
Zone 3 Power On Last
Volume
46
Setting Details
Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 2 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Set the maximum value for Zone 2 to avoid too
high volume. Select a value from "Off", "50" to
"99".
Set the Zone 2 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
• You cannot set a higher value than that of
"Zone 2 Maximum Volume".
Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 3 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Set the maximum value for Zone 3 to avoid too
high volume. Select a value from "Off", "50" to
"99".
Set the Zone 3 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
• You cannot set a higher value than that of
"Zone 3 Maximum Volume".
Tuner
Setting Item Default Value
AM/FM Frequency 10kHz/200kHz
Step
(North American
model)
AM Frequency Step 9kHz
(Australian model)
Advanced Settings
Setting Details
Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
• When this setting is changed, all radio
presets are deleted.
Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
• When this setting is changed, all radio
presets are deleted.