›
Remove the connector from the bulb, unlock the securing clip and remove
the bulb
» Fig.
158.
›
Insert a new light bulb in such a way that the fixing lugs of the bulb socket fit
in the recesses of the reflector.
›
Lock the circlip and insert the connector in the bulb.
›
Fit the rubber cover
.
A
Changing the high beam bulb (halogen projector headlights)
Read and observe
and
›
Remove the rubber cover
» Fig. 157
1
›
Turn the socket with the bulb to the stop in the direction of the ar-
row
» Fig. 159
and remove it.
›
Replace the bulb, insert the connector and new bulb and turn to the stop in
the opposite direction to that of the arrow.
›
Fit the rubber cover
.
1
Changing the high beam bulb (halogen projector headlights)
172
Do-it-yourself
Fig. 159
Removing the bulb for the low
beam
on page 171 first.
on page 171.
Fig. 160
Removing the bulb for the main
beam
Read and observe
and
›
Remove the rubber cover
» Fig. 157
2
›
Turn the socket with the bulb to the stop in the direction of the ar-
row
» Fig. 160
and remove it.
›
Replace the bulb, insert the connector and new bulb and turn to the stop in
the opposite direction to that of the arrow.
›
Fit the rubber cover
.
2
Changing the front turn signal bulb
Read and observe
and
›
Remove the bulb holder
» Fig. 157
B
stop in an anti-clockwise direction and remove with the bulb for the turn sig-
nal.
›
Replace the bulb, insert the bulb holder with the new bulb and turn clock-
wise to the stop.
Changing the front parking light bulb
Read and observe
and
›
Remove rubber cover
» Fig. 157
A
›
Grasp the lamp holder and remove it from the bulb housing.
›
Replace the light bulb and insert the lamp holder back into the headlamp
with the bulb.
›
Fit the rubber cover.
on page 171 first.
on page 171.
on page 171 first.
on page 171 or the bulb holder
on page 171 first.
on page 171 or
.
2
to the
3