Advertisement
Removing Inner Cover
NOTE: For this procedure, refer to FIGURE 3.
1. Remove the seat from the outer cover. Refer to Removing/Installing Seat Covers
on page 4.
2. Unzip the existing inner cover.
3. Remove the seat from the existing inner cover.
Inner Cover
FIGURE 3 Removing Inner Cover - Installing Inner Cover
Installing Inner Cover
NOTE: For this procedure, refer to FIGURE 3.
1. Position the seat with the ischial relief area toward the rear of the new/existing
inner cover.
NOTE: The bottom rear surface of the seat is marked "REAR". The zipper is at the rear of
the cover.
2. Slide the seat into the new/existing inner cover.
3. Zip the new/existing inner cover closed.
4. Reinstall the seat (inside inner cover) into the outer cover. Refer to
Removing/Installing Seat Covers on page 4.
Modifying Seat to Fit onto Drop Base
NOTE: This procedure is required only if the seat does not sit flush on the drop base.
NOTE: For this procedure, refer to FIGURE 4.
1. Remove seat from inner and outer covers. Refer to Removing/Installing Seat
Covers on page 4.
2. Without the inner or outer covers, place the seat on the drop base at the desired
position.
Part No 1125097
Insert - Toward Rear of
Inner Cover
5
Ischial
Seat
Zipper
InTouch™TargIT™
Relief
Area
Advertisement
