ZyXEL Communications P-660HWP-Dx Support Notes page 50

Introduction
Generally, SUA makes your LAN appear as a single machine to the outside
world. LAN users are invisible to outside users. However, some applications
such as Cu-SeeMe, and ICQ will need to connect to the local user behind the
P-660HWP-Dx. In such case, a SUA server must be configured to forward the
incoming packets to the true destination behind SUA. After the required server
are configured in Web Configurator, Advanced Setup, Network -> NAT ->
Port Forwarding, the internal server or client applications can be accessed by
using the P-660HWP-Dx's WAN IP Address.
SUA Supporting Table
The following are the required Web Configurator, Advanced Setup, Network
-> NAT -> Port Forwarding for the various applications running SUA mode.
ZyXEL SUA Supporting Table
Application
HTTP
FTP
TELNET
POP3
SMTP
mIRC
Windows PPTP
All contents copyright © 2007 ZyXEL Communications Corporation.
1
Required Settings in Port Forwarding
Port/IP
Outgoing Connection
None
None
None
None
None
None for Chat.
For DCC, please set
Default/Client IP
None
P-660HWP-Dx Support Notes
Incoming
Connection
80/client IP
21/client IP
23/client IP
(and active Telnet
service from WAN)
110/client IP
25/client IP
.
1723/client IP
49