Using The Appliance - Hotpoint SG E12 AA0 Operating Instructions Manual

en
and avoid damaging the fabric. Silk, wood
and synthetic fabrics: iron the garment inside
out to prevent any shiny marks. Start with
the garments that require a low temperature,
e.g. synthetic fabrics.
6. Select the appropriate steam setting by
means of the steam control (16) or set it
to the Min position to iron without steam.
As soon as the selected steam quantity is
available, the Steam Ready indicator light
(20) will turn green.
Fabrics with this symbol on the label
must not be ironed.
GARMENT
FABRIC TYPE
LABEL
synthetic
silk
mixed cotton
wool
mixed wool
cotton
linen
jeans

USING THE APPLIANCE

When you switch on the steam generator
for the first time, you may notice an
unpleasant smell, a little smoke and some
impurities. They will disappear in a few
minutes.
Optimal Soleplate Temperature (C)
If your Power Perfection is equipped with the
Optimal Soleplate Temperature technology, you
need not adjust the temperature and you need not
sort out the garments based on their fabrics. Just
connect the plug of the appliance to a grounded
socket (220/240V). As soon as the temperature
indicator light turns off, you can simply start
ironing all the fabric types that can be ironed in
any order.
Ironing without steam (D)
1. Set the steam control (16) to the Min position
(= no steam).
2. Select the
10
TEMPERATURE STEAM
INDICATION INDICATION
MIN
Min
Min
LINEN
recommended ironing
temperature using the temperature control
(21) - see step B, chapter "Temperature
selection and steam adjustment".
3. Wait for the temperature indicator light to
turn off and start ironing without pressing the
steam button.Ironing with steam (E)
1. Make sure that the water level in the reservoir
is higher than 1/4.
2. Select the appropriate steam adjustment
using the steam control (16) and the
recommended ironing temperature using
the temperature control (21) - see step B,
chapter "Temperature selection and steam
adjustment".
3. Press the steam button (14) to use the steam
ironing function. We recommend using the
steam button function when the temperature
is higher than
Wait for the temperature indicator light
to turn off and for the Steam Ready
indicator light to turn on, before pressing the
steam button.
Ironing with shot of steam (F)
The shot-of-steam function is useful to iron out any
persistent wrinkles through a uniform emission of
steam onto the fabrics. You can use this function
both in no-steam and steam ironing mode.
1. Make sure that the water level in the reservoir
is higher than 1/4.
2. Select the appropriate steam adjustment
using the steam control (16) and the
recommended ironing temperature using
the temperature control (21) - see step B,
chapter "Temperature selection and steam
adjustment".
3. Press the shot-of-steam button (15) to
get an extra steam flow when ironing. We
recommend using the shot-of-steam button
when the temperature is higher than
Wait for the temperature indicator light
to turn off and for the Steam Ready
indicator light to turn on, before pressing the
steam button.
FEATURES
Vertical steam function (G)
The vertical steam function is useful to iron out
.
.