Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hotpoint SG E12 AA0
Summary of Contents for Hotpoint SG E12 AA0
- Page 1 Operating Instructions...
- Page 2 SG E12 AA0 UK | SG DC11 AA0 UK SG C10 AA0 UK...
-
Page 6: General Safety Rules
GENERAL SAFETY RULES • If the plug, power cord, steam cable, parts of the appliance or the appliance itself appear to be damaged or if any visible damage or water leaks are found, do not operate the steam generator. In such cases have it checked by Hotpoint’s authorised staff in order to avoid any hazardous situation. • If the appliance was dropped, do not operate it. • This appliance can be used by children aged from 8 years and above and persons with reduced... - Page 7 • For your safety, all repairs or maintenance operations on the appliance must be carried out exclusively by Hotpoint’s authorised staff. • Cleaning and user maintenace hall not be made by children without supervision. • Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down. This symbol warns operators that surfa ces are liable to get hot during use and can burn your skin.
-
Page 8: Description Of The Appliance
Power Perfection steam generator. We sure that a grounded socket is available. recommend registering this product on • Regularly check the condition of the power www.hotpoint.co.uk to make sure you are cord. entitled to all the benefits made available by Hotpoint's Customer Service. • When cleaning the appliance, make sure it has been unplugged from the socket. - Page 9 other liquid. compliance with BS 5733) which is accessi- • Do not leave the appliance in the open air ble without moving the appliance. and exposed to inclement weather condi- Disposing of the plug tions. • Never leave or use the appliance over or Ensure that before disposing of the plug itself, you close to flames, ovens, flammable materials make the pins unusable so that it cannot be acci- or other sources of heat. dentally inserted into a socket. When being used, the boiler can get very Instructions for connecting cable to hot.
-
Page 10: Filling The Water Reservoir
The power supply cable must only be re- scale-removing agents, ironing placed by an authorised serviceman. products or other chemicals in the water reservoir - unless recommended by Hotpoint. FILLING THE WATER Never use contaminated water. RESERVOIR USING YOUR IRON Water plays an essential role both in the ironing... -
Page 11: Using The Appliance
and avoid damaging the fabric. Silk, wood temperature using the temperature control and synthetic fabrics: iron the garment inside (21) - see step B, chapter “Temperature out to prevent any shiny marks. Start with selection and steam adjustment”. the garments that require a low temperature, Wait for the temperature indicator light to e.g. synthetic fabrics. turn off and start ironing without pressing the Select the appropriate steam setting by steam button.Ironing with steam (E) means of the steam control (16) or set it Make sure that the water level in the reservoir... -
Page 12: Cleaning And Maintenance
wrinkles from hanging garments, curtains etc. To electrical socket and let the steam generator use this function just place your iron in a vertical cool down. position. All the functions of the steam generator Empty the water reservoir (8). will remain unchanged in this position - refer to Place the iron into its housing, making sure paragraph “Using the appliance”. that its tip fits into the special groove and We also recommend using the shot-of-steam close the iron locking lid (11) using the function to iron any hanging garments, because special iron locking button (12). - Page 13 the water reservoir. When you start the steam generator again, before using the steam function Scale removal (L) on the garments press the steam button for at least one minute to eject any residues or If your steam generator is not equipped with particles that could stain the fabrics.
-
Page 14: Troubleshooting
TROUBLESHOOTING Problem Possible causes / Solutions The soleplate stays cold and • The plug was not inserted or is not making contact. does not warm up. • Make sure the temperature is not set to Min. • The temperature indicator light is on. This shows that the The temperature indicator light goes on and off. iron is warming up. The indicator light will turn off when the set temperature is reached. Steam comes out in a re- •... - Page 15 The soleplate is dirty or dark • You are using a temperature that is too high. Clean the and may stain the fabrics. soleplate - see chapter “Cleaning and maintenance” under paragraph “Cleaning”. • You are using starch. You can use starch directly on the reverse side of the fabrics and in any case never in the water reservoir.
-
Page 16: After Sales Service
We have a dedicated team who can provide free duct at no cost to you. advice and assistance with your product if you This Guarantee is subject to the following condi- experience any technical difficulties. Simply call tions: our Hotpoint Service Hotline on 08448 240 055 (Republic of Ireland 0818 904 041) for telephone • Documentary proof of original purchase date assistance. is provided. Please note: •... -
Page 17: Disposal Of Old Electrical Appliances
Equipment (WEEE), requires that old ship of your product and offer you an additional household electrical appliances must free 1 year guarantee when you register your not be disposed of in the normal unsor- product with Hotpoint within 28 days of purchase. ted municipal waste stream. If you do not register your product with Hotpoint Old appliances must be collected se- within 28 days, your product is guaranteed for 1 parately in order to optimise the recovery and year only. - Page 18 Indesit Company UK Ltd Morley Way, Peterborough PE2 9JB www.indesitcompany.com...