Related Manuals for Multitech MultiVOIP MVPGSM-2
Summary of Contents for Multitech MultiVOIP MVPGSM-2
- Page 1 ® MultiVOIP SIP-to-Cellular Gateway MVPGSM-2 Cabling Guide...
- Page 2 5.355.653; 5.452.289; 5.453.986. Other Patents Pending. GENERAL TECHNICAL SUPPORT CONTACT Multi-Tech Country By E-mail By Phone Systems, Inc. Europe, 2205 Woodale Drive Middle East, support@multitech.co.uk (+44) 118 959 7774 Mounds View, Africa Minnesota 55112, USA (763) 785-3500 U.S., (800) 328-9717 (800) 972-2439; Canada, support@multitech.com...
-
Page 3: Safety Warnings
MultiVOIP GSM Introduction This guide shows you the cable connections and the SIM card placement for your MVPGSM unit. See your User Guide included on the CD for more information. Safety Warnings Lithium Battery Caution A lithium battery on the board provides backup power for the timekeeping capability. - Page 4 Cabling Guide RF Interference Issues It is important to follow any special regulations regarding the use of radio equipment due in particular to the possibility of radio frequency (RF) interference. Please follow the safety advice given below carefully. • Switch OFF your MultiVOIP GSM when in an aircraft. The use of cellular telephones in an aircraft may endanger the operation of the aircraft, disrupt the cellular network and is illegal.
- Page 5 MultiVOIP GSM Cable Hookups for MVPGSM-2 • Connect a power cord to the transformer and to a live AC outlet, and then attach the barrel connector to the back of the MultiVOIP GSM as shown in the figure above. • Connect the MultiVOIP GSM to a PC by using a RJ-45 (male) to DB-9 (female) cable.
-
Page 6: Gsm Instructions
Cabling Guide GSM Instructions Step 1 – Activate Your Wireless Account Please see the wireless account Activation Notices located on the CD if you need to activate your account. Phone Numbers: Each channel will have its own unique phone number. The phone number may simply be given to you by your wireless service provider or it may be on the SIM card or both. -
Page 7: Mounting Dimensions
MultiVOIP GSM Mounting Dimensions The MVPGSM-2 has a series of six keyed holes for ease and versatility of mounting. Make sure your signal strength is adequate before permanently attaching the MVPGSM to a surface. Multi-Tech Systems, Inc. - Page 8 82100370L...