Table of Contents
Advertisement
digit buttons on the remote control. There are
100 program storage between 0 and 99.
Band
Band can be selected either "C" or "S" by press-
ing "
" or "
" button.
Channel
Channel can be changed by "
or Digit Buttons.
Colour System
By pressing "
" or "
System. Press "
" or "
colour system to PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not avail-
able for the Colour System.
Note: In EXT mode, you can choose NTSC 3.58
and NTSC 4.43 as well.
Sound System
By pressing "
" or "
System. Press "
" or "
sound system to BG, DK, I, L or LP.
Fine Tune
By pressing "
" or "
Press "
" or "
" button to adjust the tuning.
Search
By pressing "
" or "
Press "
" or "
" button to start program search-
ing. The searching will stop when a signal is
found. You can also enter a frequency value
directly by pressing the digit buttons.
VCR (Video Cassette Recorder)
• If you want to watch a VCR source then it will be
better to set VCR mode "on". For this, while the
cursor is on this item press the "
to set it "On".
• If you want to watch a DVD, then you must
set this item "Off".
Store Program
By pressing "
" or "
Program. Press "
store the adjustments. "Program Stored" will be
displayed on the screen.
01-ENG-37737W-42737W-1072 UK-37-42 INCH 17MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)-50101853.p65
" or "
" button
" button, select Colour
" button to change the
" button, select Sound
" button to change the
" button, select Fine Tune.
" button, select Search.
" or "
" buttons
" button, select Store
" or "
" or "OK" button to
12
Program menu
By pressing "
" or "
" button, select the fifth icon.
Program menu appears on the screen.
PROGRAM
01
ITV
02
ZDF
03
CH5
04
C - 02
05
C - 05
06
C - 06
07
C - 08
08
C - 21
09
C - 23
10
C - 35
By moving the cursor in four directions you can
reach 20 programmes in the same page. You can
scroll the pages up or down by pressing the navi-
gation buttons to see all the programmes in TV mode
(except the AV mode). By cursor action, programme
selection is done automatically.
Name:
To change the name of a decided programme, se-
lect the programme and press the RED button.
The first letter of the selected name starts to blink.
Press "
" or "
" button to change that letter and
"
" or "
" button to select the other letters. By press-
ing the RED button, you can store the name.
Insert:
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By navi-
gation buttons move the selected programme to the
decided programme space and press the GREEN but-
ton again.
Delete:
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.
APS (Automatic Programming System)
When you press the BLUE button for APS, the follow-
ing warning screen will be displayed.
- 12 -
02.04.2007, 11:17
11
C - 43
12
C - 64
13
C - 68
14
S - 40
15
- - - - -
16
- - - - -
17
- - - - -
18
- - - - -
19
- - - - -
20
- - - - -
Name
Insert
Delete
APS
Hide quick links:
Advertisement
Table of Contents
