Yamaha Raptor YFM7RB Owner's Manual page 42

Compression damping force (for slow compres-
sion damping)
To increase the compression damping force and
thereby harden the compression damping, turn the
compression damping force adjusting screw in di-
rection (a). To decrease the compression damping
force and thereby soften the compression damp-
ing, turn the adjusting screw in direction (b).
4
1
1. Compression damping force adjusting screw (for slow
compression damping)
(a)
(b)
1
Compression damping setting (for slow com-
pression damping):
Minimum (soft):
16 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned in direc-
tion (a)
EWB00430
WARNING
This shock absorber assembly contains highly
pressurized nitrogen gas. Read and under-
stand the following information before han-
dling the shock absorber assembly.
G
Do not tamper with or attempt to open the
cylinder assembly.
G
Do not subject the shock absorber assembly
to an open flame or other high heat source.
This may cause the unit to explode due to ex-
cessive gas pressure.
G
Do not deform or damage the cylinder in any
way. Cylinder damage will result in poor
damping performance.
4-23