Yamaha Raptor YFM7RB Owner's Manual page 130

1. Signaling system fuse
2. Headlight fuse
3. Ignition fuse
4. Fuel injection system fuse
5. Spare fuse
8
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off all electrical
circuits.
ECB00640
NOTICE
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
2. Remove the blown fuse, and then install a
1
2
5
3
4
3. Turn the key to "ON" and turn on the electrical
4. If the fuse immediately blows again, have a
8-48
new fuse of the specified
WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.
Specified fuses:
Main fuse:
20.0 A
Headlight fuse:
15.0 A
Ignition fuse:
10.0 A
Signaling system fuse:
10.0 A
Fuel injection system fuse:
10.0 A
circuits to check if the devices operate.
Yamaha dealer check the electrical system.
amperage.
[EWB02172]