Table of Contents
Advertisement
Proflame 2 Transmitter
Low Battery Power Detection
The life span of the batteries depends on various factors:
quality of the batteries used, the number of ignitions
of the appliance, the number of changes to the room
thermostat set point, etc.
Remote Control
When the Remote Control batteries are low, a Battery
Icon will appear on the LCD display of the Remote
Control, see figure 16, before all battery power is lost.
When the batteries are replaced this icon will disappear.
Figure 16. Low Battery Power Detection
Control Module
(Not applicable for Power Vented Units)
When the Control Module batteries are low, a "double-
beep" will be emitted from the IFC when it receivers
an On/Off command from the Remote Control. This is
an alert for a low battery condition of the receiver and
after that no more command will be accepted. When the
batteries are replaced the "beep" will be emitted from the
receiver as soon as powered.
Page 8
Maintenance
Troubleshooting:
Below is a list of possible problems and solutions.
Problem
Control module beeps
twice when On/Off button
on remote is pressed and
Red LED is On.
Lights and Fans will not
turn On.
Pilot will not spark.
Main burner will not light.
Solution
Replace batteries in battery
pack.
(Not applicable for Power Vented Units)
Check main power is On.
Check and turn main On/Off
switch to On.
Check wiring
XG0677 - 141231
Hide quick links:
Advertisement
Table of Contents
