Sony RM-B750 Operation Manual page 54

Menu Configuration and Basic Menu Operations
Menu 2ndary menu
SD Adjusting SD Matrix
SD Multi Matrix
Super Motion Flicker Reduction
d)
Field Rate
Frame Interpolation
Flicker Reduction
RM Config RM Adjusting
SW Setting
c) When connected to an HD system
d) When connected to an SD system
e) Selectable or displayed only in Engineer Mode
22(E)
Submenu Control item
Matrix 1 R-G/G-B/B-R
z
User Matrix
Preset Matrix
Matrix Off
Matrix 2 R-B/G-R/B-G
z
User Matrix
Preset Matrix
Matrix Off
Phase
z
Hue
z
Sat
z
Multi Matrix
Matrix Off
All Clear
c)
Flicker Reduction
[ x1, x3 ]
d)
[ OFF, A, B, C ]
d)
[ OFF, Normal, Strong ]
Buzzer Volume Call
z
Touch
z
Switch
z
Master
z
Call Buzzer
Touch Click
SW Click
All Off
LED Brightness Switch
z
Other
z
Master
z
Panel Active Mode Active Mode
TEST TEST Mode
e)
VTR S/S VTR/CALL
e)
Function SW VTR Ctrl/CAM Ctrl
e)
Menu Control Off/ CAM VF/CCU
Function
Set the matrix coefficients.
Turns the user matrix ON/OFF.
Turns the preset matrix ON/OFF.
Turns all the matrixes ON/OFF
Set the matrix coefficients.
Turns the user matrix ON/OFF.
Turns the preset matrix ON/OFF.
Turns all matrixes ON/OFF.
Select the multi matrix phase.
Adjust the multi marrâx hue.
Adjust the multi matrix saturation.
Turns the multi matrix ON/OFF.
Turns all the matrixes ON/OFF
Clears all the multi matrix settings.
Turns the flicker suppression of the HD Super-Motion
camera ON/OFF.
Sets the field rate when using a Super-Motion camera.
Sets the pattern to make the reference output picture in
3-times mode.
Sets the flicker suppression in 3-times mode.
Adjusts the volume of the call buzzer.
Adjusts the volume of the response sound of the touch panel.
Adjusts the volume of the confirmation sound of self-
illuminating switches.
Adjusts the total buzzer sound volume.
Turns the call buzzer ON/OFF.
Turns the response sound of the touch panel ON/OFF.
Turns the confirmation sound of switches ON/OFF.
Turns all the buzzers ON/OFF.
Adjusts the brightness of the corresponding LEDs.
Adjusts the master brightness of the LEDs.
Switches the mode of the PANEL ACTIVE button.
Mode 2: FULL/LOCK
Mode 3: FULL/PART/LOCK
Select the signal to be output when pressing the TEST
button (Saw, 3STEP, 10STEP).
Switches between VTR and CALL functions of the VTR
START/STOP button.
Switches between VTR playback control functins and camera
control functions for the VTR playback control buttons.
Off: Disables menu control of another device.
CAM VF: Enables camera menu control.
CCU: Enables CCU menu control.