Various Functions
All procedures performed with a
connection to a USB 2.0 compliant
board are not guaranteed.
1
Install the driver and the software
applications bundled on the
Canon Digital Camera Solution
Disk (first time only).
Please see the Canon Digital Camera
Software Starter Guide Disk. for the
installation procedures.
2
Use the supplied interface cable to
connect the computer's USB port
to the camera's
Interface cable
86
terminal.
3
Press the
USB
port
Windows
Proceed to steps 4 and 5 below.
Macintosh
Refer to the Canon Digital Camera Software
Starter Guide Disk and download images.
Terminal
1.Open the terminal cover with
your finger nail.
2.Insert the connector until it clicks.
Always grasp the
connector's sides to
remove the interface
cable from the
camera's
terminal.
button.