Canon PowerShot A310 User Manual page 34

Shooting – The Basics
Functions Available in Each Shooting
Mode (p. 128).
With the Review function, you can
change the length of time images show
on the LCD monitor after shooting, or set
it so they do not show at all (p. 34).
If the orange or yellow indicator blinks
while you press halfway, you can still
press fully to take the shot.
Images are first saved into the camera's
internal memory before being recorded
onto the CF card, allowing the next
images to be taken immediately as long
as sufficient space is available in the
internal memory.
The beep and shutter sound can be set
on/off in the Set up menu (p. 59).
Even when the shutter sound is set to
[ , , (On)] (p. 61), no sound will
be heard if [Mute] is set to [On].
There is no shutter sound in movie
mode.
Shots cannot be taken while the flash is
charging.
32
Shooting with Viewfinder
You can save the power by turning the LCD
monitor off and using the viewfinder to shoot.
1
Compose the image so that the
subject appears in the center of
the viewfinder.
Image Seen in Viewfinder vs.
Recorded Image
When shooting an image, a larger range
than the one visible in the viewfinder
usually gets recorded. You can confirm the
actual range that will be recorded in the
LCD monitor. In addition, due to the
viewfinder's specification, the range visible